5108 Polyaspartic High-Solids Fast Drying Coating/Topcoat 2 Gal Kit

5108 Polyaspartic High-Solids Fast Drying Coating/Topcoat

Deliver a high-quality, abrasion-resistant finish to your next concrete flooring installation with Versatile’s 5108 Polyaspartic High-Solids Fast Drying  Coating/Topcoat. This exclusive product has a workable pot life of 45 minutes, but offers an extremely low walk-on time of only –two to three hours. Combining high-quality results with an ultra-low turnaround time, the 5108 Polyaspartic coating is an indispensable option for any professional installer.

The Next Generation of Polyaspartic Coatings

Our 5108 Polyaspartic formula is a next generation coating. We’ve created this product using the latest polyaspartic technology. It is specially formulated to deliver previously unheard-of performance.

With our 5108 Polyaspartic High-Solids Fast-Drying Coating/Topcoat, you get a polyaspartic topcoat that delivers:

• Ease of Application. Despite its high-solids formula, 5108 Polyaspartic coating can be applied with the ease and smoothness of a low-viscosity coating.
• High Solids. Our 5108 Polyaspartic product uses a near total-solids formulation, resulting in a high-quality finish that produces minimal contraction when drying.
• Workable Pot Life. The 5108 Polyaspartic coating/topcoat has one of the longest pot life times of any fast-drying product, lasting for 45 minutes.
• Fast Drying Time. After installation, a floor can be walked on within only two hours of application. Use this product whenever fast turnaround is needed.
• Abrasion Resistance. When dry, the 5108 Polyaspartic coating/topcoat has up to four times the abrasion resistance of a standard concrete epoxy coating.
• Glossy Appearance. Using this product as the topcoat on your flooring installations results in a high gloss, “wet look” appearance.

The Perfect Topcoat for Epoxy Flooring Installations

The 5108 Polyaspartic High-Solids Fast Drying Coating/Topcoat is an excellent choice to seal practically any epoxy flooring installation, from standard epoxy coatings to decorative installations. Thanks to its glossy appearance and excellent abrasion resistance, our 5108 Polyaspartic topcoat will help seal, enhance, and preserve the appearance of your flooring installations.

If you are applying a topcoat to a decorative flooring installation, we suggest combining our 5205 Polyurea Ultra-Fast Drying Clear Primer/Sealer with the 5108 Polyaspartic coating. Apply the 5205 Polyurea primer first and wait one hour for it to dry, then apply the 5108 Polyaspartic topcoat overtop. This delivers a high-end finish that can be used inside or outside. The 5108 Polyaspartic coating can be applied as a standalone topcoat over flaked garage floors, stained concrete, microtoppings, or stamped concrete.

Give your next concrete flooring installation the glossy, abrasion-resistant finish it deserves with our 5108 Polyaspartic High-Solids Fast-Drying  Coating/Topcoat.