Our 4800 Industrial Epoxy Floor Coating is a high-quality, economical resin epoxy flooring system. It offers the attractive, high-gloss finish of commercial-quality epoxy along with the strength and durability associated with industrial-grade epoxy. This makes it the perfect choice for almost any indoor space. Available in a range of colors and in low-yellowing options, the 4800 Industrial Epoxy Floor Coating is one of our most popular epoxy flooring products.
The 4800 Industrial Epoxy Floor Coating is a 100% solids epoxy coating that offers easy application and high-quality results. Available in a range of different formulations, our 4800 line includes options for lower and higher viscosity applications, improved air release, faster curing, and UV resistance. 4800 Industrial Epoxy Floor Coating is also available in both high-gloss clear and high-gloss pigmented colors, giving you full flexibility when it comes to your floor’s appearance. All of our 4800 formulations are abrasion-resistant and chemical-resistant.
Our 4800 Industrial Epoxy Floor Coating options include low-yellowing options that limit the impact of indoor lighting and UV exposure. The low-yellowing formulation of our 4800 product is perfect for both indoor spaces and is highly resistant to discoloration from indoor lighting, helping your floor retain a water-clear finish. Our low-yellowing formulation is not recommended for outdoor spaces or areas that receive heavy amounts of sunlight.
Garage Coatings.com’s 4800 Industrial Epoxy Floor Coating can be applied to create a low-build or high build finish. It is often used as an economical option to create an intermediate build over flake flooring systems, making it easy to create a smooth, even finish.
4800 Industrial Epoxy Floor Coating can also be used to give a medium-build to high-build finish over other epoxy systems, decorative flooring overlays, and a wide range of other flooring styles.
Used as an Economical Build Coat over Flake
4800 clear is widely accepted for use as an intermediate build coat over flake systems to give a smooth finish by coatings applicators. When used this way, be sure to terminate the 4800 at the door edge. Do not go onto exterior surface or it will yellow. Use our UV Inhibitor Pack to increase the low-yellowing performance.
Features and advantages:
Tests Done at 70 Degrees
Fahrenheit with 1/2 Pint Mass
|Pot Life||40 minutes|
|Gel Time||45 minutes|
|Through Dry (Hours)||8|
|Percent Solids||99/Wt. 99/Vol.|
|10% HCL||No Effect|
|Liquid Plumber||Faint Spotting|
|Motor Oil||No Effect|