Direct to Concrete Pigmented Epoxy Concrete Floor Coating and Sealer for Garage Floors
4195 is a Pigmented Direct to Concrete two-part Pigmented Epoxy Floor Coating system for garage floors. This garage floor epoxy coating is designed specifically for receiving the vinyl chips that are used to create the Roll on Rock® Epoxy Garage Floor and Industrial Flooring System.
4195 uses 4150 Vapor Stop as the backbone. The ideal chipping window for 4195 is between 15 and 45 minutes of application, where Vapor Stop's ideal chipping window is 30-60 minutes. 4195 Direct to Concrete Epoxy for garage floors is available in over 8 colors that are designed to work well with any flake combination.
4195 is self-priming which allows the applicator to broadcast into the first coat under most circumstances. 4195 wicks deep into the concrete and bonds so well that you can expect to get over 8lbs of MVE blocking power. You can also use this Direct to Concrete Floor Coating Epoxy as a Primer beneath other Epoxy, Polyurethane, Polyurea and Polyaspartic Systems when they are being applied to concrete floors and slabs.
4195 Direct to Concrete Epoxy exhibits all of the great features needed in an Epoxy Concrete Floor Coating. 4195 is also a great Epoxy Flooring choice when a solid color pigmented Epoxy Floor Coating and Sealer is desired. In most cases, all that is needed is one or two coats of the Direct to Concrete Epoxy Flooring to achieve a tough uniform solid color of a new or old concrete floor or slab. 4195 has great potlife and a low odor making it a very easy Epoxy Floor Coating product to apply to a concrete floor in your garage, showroom or workspace.
Lifetime Adhesion Warranty
To celebrate over ten years of 4195 Direct to Concrete Epoxy garage floors with millions of square feet of installed without failure, we now offer a lifetime adhesion warranty for this extraordinary product. To receive your warranty, simply fill out the forms found on our 4195 product documentation tab.
Features & Advantages
4195 Chipping Epoxy
Tests Done at 70 Degrees
Fahrenheit with 1/2 Pint Mass
|Pot Life||3 Hours||Xylene||No Effect|
|Gel Time (Hours)||7.75||10% HCL||Spotting|
|Through Dry (Hours)||10.5||Ammonia||No Effect|
|VOC||30 g/l||Degreaser||Faint Spotting|
|Percent Solids||95/Wt. 92/Vol.||Liquid Plumr||Faint Spotting|
|Pencil Hardness||H-2H||Windex||No Effect|
|UV Resistance||Poor||Motor Oil||No Effect|
|Non Yellowing||Poor||Gasoline||No Effect|
|Abrasion Resistance||OK||Hot Tire||N/A|