Moisture and concrete coatings simply don’t mix. Until now, moisture vapor emissions (MVE) and moisture vapor transmission (MVT) have damaged countless concrete floor installations and overlays. That ends with the 4150 MVE-Blocking Garage Floor Sealer/Primer. This two-component epoxy provides up to 15 lbs. of MVE protection, shielding concrete and concrete coating installations from moisture-related damage.
4150 MVE-Blocking Garage Floor Sealer/Primer can be used as a standalone sealant, as a primer for concrete epoxy installations, and as a protective layer beneath moisture-vulnerable floors, including:
Our 4150 MVE-Blocking Garage Floor Sealer/Primer was designed to lock moisture out of concrete surfaces. It works by wicking deep into concrete, then curing to form a moisture-resistant barrier. This barrier limits up to 15 lbs. of MVE and MVT, making it one of the strongest moisture-resistant epoxies on the market.
Safe, Simple, Quick Installation on Concrete Surfaces
With 4150 MVE-Blocking Garage Floor Sealer/Primer, it’s easy to protect garage floors and other concrete surfaces against moisture. This roll-on epoxy is easy to apply, making it the perfect choice for first-time installers and seasoned professionals alike. Better yet, 4150 uses a low-odor, non-flammable formula. That means you don’t need to stop work in nearby areas to install this product. It can even be applied to damp or wet concrete without compromising performance.
The Perfect Primer or Sealer for Garage Floors & Concrete
4150 MVE-Blocking Garage Floor Sealer/Primer works equally well as a primer or as a standalone sealant on concrete surfaces. Using 4150 as the base layer of a concrete coating installation will ensure superior MVE protection for the coating you install. If used as a standalone sealant, 4150 gives concrete a glossy, “wet look” appearance and excellent protection against surface moisture.
Features & Advantages:
Any other surface that requires MVE-blocking garage floor sealer
4150 Vapor Stop
Tests Done at 70 Degrees
Fahrenheit with 1/2 Pint Mass
|Pot Life||60 minutes||Xylene||No Effect|
|Gel Time (Hours)||2.75||10% HCL||Spotting|
|Through Dry (Hours)||12||Ammonia||No Effect|
|Percent Solids||97/Wt. 94/Vol.||Liquid Plummer||Faint Spotting|
|Pencil Hardness||H-2H||Windex||No Effect|
|UV Resistance||Good||Motor Oil||No Effect|
|Non Yellowing||Good||Gasoline||No Effect|
|Abrasion Resistance||OK||Hot Tire||N/A|