ICC floor is a four-coat application made up of 4150 VAPORSTOP PRIMER, and 4800 build coats, topcoated with 5300 a Protective Chemical Resistant Urethane. ICC floor is intended for applications over concrete and existing concrete coatings where strong durability and chemical resistance are desired. ICC offers the protection that comes with a 30 mil epoxy floor system. Consult with a Versatile Building Products representative for specific recommendations.

Stop using 5 different products to cover your residential, commercial, and light industrial concrete work! You need a Versatile sealer that can perform and multi-task your sealing needs. 4001 Waterbased Concrete Epoxy Clear utilizes a crosslinking technology that allows it to breathe out moisture emmisions found on high MVT slabs. 4001 Waterbased Epoxy will provide give your concrete surface a Wet Look while providing a medium to high gloss that will accept medium foot traffic in retail areas.

4010 & 4020 Colorseal is a waterborne pigmented Epoxy Concrete sealer designed for use over concrete. 4010- 4020 Waterborne Epoxy Colorseal utilizes a crosslinking technology that allows it to breathe out moisture emmisions found on high MVT slabs. 4010/4020 Waterbased Epoxy is used as a chip reciever coat as well as a final coat for monolithic floors. Due to its waterborne technology, 4000/4020 Epoxy is very user friendly and can be used in most areas.

4100 Vapor Blocking Epoxy Concrete Primer is a Clear two part epoxy primer and sealer designed to reduce moisture vapor emissions from concrete to acceptable levels for moisture and vapor sensitive floor systems and coatings. 4100 Vapor Blocking Epoxy develops a tenacious bond to properly prepared surfaces and blocks the passage of moisture vapor. It is not uncommon for 4100 to reduce 15lbs of MVE down to 2lbs. 4100 Vapor Blocking Epoxy works so well that it will penetrate and cure within concrete even when applied under water. The system is applied easily by roller or squeegee without odors or flammability issues that could disrupt surrounding operations. 4100 Clear Epoxy provides a Wet Look and low MVT Floor Coating suitable for use below a wood, VCT or other type of non breathing floor system.

4150 Vapor Stop MVE Blocking Epoxy is a Pigmented two part epoxy primer and sealer designed to reduce moisture vapor emissions from concrete to acceptable levels for moisture and vapor sensitive floor systems and coatings. Vapor Stop is also used for the chip coat in epoxy floor systems that use vinyl chips. Using 4150 Vapor Stop MVE Blocking Epoxy reduces the risk of the epoxy floor system from blowing off from high moisture emmission rates.4150 Vapor Stop MVE Blocking Epoxy develops a tenacious bond to properly prepared surfaces and blocks the passage of moisture vapor. It is not uncommon for 4150 Vapor Stop MVE Blocking Epoxy to reduce 15lbs of MVE down to 2lbs. 4150 Vapor Stop MVE Blocking Epoxy works so well that it will penetrate and cure within concrete even when applied under water. The system is applied easily by roller or squeegee without odors or flammability issues that could disrupt surrounding operations.

4195 Direct To Concrete Epoxy Pigmented Chip Recieving Epoxy

4195 Direct to Concrete Epoxy is a Pigmented two part epoxy designed specificaly for recieving the vinyl chips. 4195 Direct to Concrete Epoxy uses Vapor Stop as the backbone. 4195 Direct to Concrete Epoxy requires the chips to be broadcast within 5 minutes of application, where Vapor Stop's ideal chipping window is 30-60 minutes.

Versatile Building Products 4800 100 Percent Solids Industrial Epoxy is a general use 100% solids clear and pigmented topcoat resin that exhibits good chemical and wear resistance. 4800 100 Percent Solids Industrial Epoxy is also available in a Non-Yellowing formual for those projects having UV or exterior exposure. 4800 100 Percent Solids Industrial Epoxy is primarily used as a concrete topcoat or system topcoat in decorative, commercial, and industrial applications requiring low odor installation and specific chemical resistance. 4800 Clear is widely accepted for use as an intermidiate buildcoat over flake systems to give a smooth finish by coatings applicators. Consult with a Versatile Building Products representative for specific recommendations.

Versatile Building Products Poly Urea 5000 & 5073 use an amazing new technology in the urethane arena that is up to100 percent solids and allows film thickness to build in excess of standard systems with water clarity and mirror smoothness. The cross linking of the film in the cure makes it exceptionally tough and durable, maintaining its gloss far beyond that of comparable systems. The chemistry is based on polyurea and much attention has been given to the application characteristics in its formulary. As a result, Poly Urea 5000 is extremely user friendly without having sacrificed the performance of the finished product. Because the product is non flammable and has a very mild odor we expect it to be the product of choice when working in and around areas where an offensive odor is an issue. The applications for this product are almost limitless; from the high end residential applications to retail settings with high traffic requirements or food service areas where stain resistance and clean ability are paramount as well as light industrial.

5205 is a propriatary formula that is designed for speed. 5205 has a potlife up to 60 minutes in real world conditions yet it dries in 30 minutes or less after it is applied to concrete. 5205 will provide an extremely wet look to the concrte due to its ability to dive deep into the concrete surface. Use 5205 as a concrete primer before applying the 5073 Polyurea clear Topcoat when coating over plain or decorative concrete. When used with 5073 a high gloss high build floor finsih can be accomplished within hours not days. 5073 can is usually dry in 2 hours and can be walked on soon after that or driven on the next day.Also, both the 5205 and the 5073 are non yellowing material so use over exterior surfaces will not be a problem

5300 Series Versa-Thane CRU is a durable 2 component chemical resistant urethane industrial floor coating designed for use in manufacturing areas, garage floors, aircraft hangars, service bays, petroleum refineries, chemical processing plants, water/wastewater treatment plants, power utilities, pulp and paper plants, and pharmaceutical facilities. Versa-Thane will provide maximum protection to concrete and coated concrete floors. Versa-Thane CRU offers great chemical resistance, Hot Tire Resistance & excellent cleanability, and superior appearance.

5400 & 5410 are Waterborne Chemical Resistant Urethanes that exhibits excellent wear and U.V. Stability. The film build, gloss and chemical resistance are comparable to solvent based systems, yet without the intense odor associated with them or the high V.O.C. levels. New technologies allow us to produce a water based product that is much higher in solids as well as attain thicker film build with no out gassing problems that its predecessors were notorious for. This allows the applicator to use the product during normal business hours where customers or neighboring tenants won’t be disturbed by an offensive solvent odor, yet not sacrifice any of the physical properties we expect from the urethanes we are all so familiar with.

The 41, 48, 50 and 53 Epoxy, Urethane and Polyurea Accelerators speed the cure of the 4100, 4800, 5000 and 5300 series systems correspondingly. Under conditions of lower temperatures, they enable the user to complete an installation without the expected delays from colder conditions. They can also be used in circumstances where there is limited shut down capacity to facilitate the specified duration of down time intended before use.