Epoxy Accelerator 48 For Use With 4800 Series Epoxy
View Full-Size Image

Epoxy Accelerator 48 For Use With 4800 Series Epoxy

Price:
$16.07
$10.51

Ask a question about this product

Use one accelerator at 60 degrees and 2 at 40 degrees when you want the material to dry at about the same time as it would take on a 70 degree day.

 

he 41, 48, 50 and 53 Accelerators speed the cure of the 4100, 4800, 5000 and 5300 series systems correspondingly. Under conditions of lower temperatures, they enable the user to complete an installation without the expected delays from colder conditions. In order to fully utilize the effectiveness of the accelerator and achieve a more rapid turn around time, it is advised to keep the components as close to ambient temperature of approximately 65 to 70 degrees F prior to the installation. The accelerators can also be used in circumstances where there is limited shut down capacity to facilitate the specified duration of down time intended before use.

 

48 Epoxy Accelerator is an additive to be used with the 4800, both pigmented and clear. It is intended for low temperature applications as well as conditions requiring earlier use than the physical properties of the coating could have developed under ambient conditions.

 

The following results were conducted at a temperature of 37 degrees F. At this temperature, the equivalent of 2 accelerators were used per kit in order to achieve cure of the films
41 Accelerator
Product
Gel Time
Dry Time
4100
37 min
22 hours
4150 Vapor Stop
48 min
11 hours
4195
2.7 hours
7.5 hours
48 Accelerator
4800
1.5 hours
18 hours
50 Accelerator
5000
6.5 hours
22.5 hours
53 Accelerator
5325
4.6 hours
13.5 hours


Install Guides | Training Sign Up Form
MSDS 41 | MSDS 48 | MSDS 50 | MSDS 53




Recently Viewed Products

Cart

VirtueMart
Your Cart is currently empty.

Testimonials


P.S. I have told Mark several times but I wanted to tell you that my guys are loving your floor coating and can't believe we didn't find you sooner. It's taking a little bit to get used to the 5073 but I think they are going to like it a lot as well.

Lyndell
Legendary Concepts of Wichita

VBP Forum

Re:5400 v 5073
calconcrete 05.15.2012 17:57
5400 v 5073
GSNE 05.14.2012 21:59
Re: Thirsty stem walls
MNewman 05.14.2012 15:32
Thirsty stem walls
calconcrete 05.12.2012 17:21
Re:MVE ?
MNewman 05.07.2012 19:53