4150 Pigmented Vapor Stop Penetrative Epoxy Primer-Sealer 1.5G
View Full-Size Image

4150 Pigmented Vapor Stop Penetrative Epoxy Primer-Sealer 1.5G

Price:
$181.95
$120.22

:
Ask a question about this product

4150 Vapor Stop Epoxy is a Pigmented two part epoxy primer and sealer designed to reduce moisture vapor emissions from concrete to acceptable levels for moisture and vapor sensitive floor systems and coatings. Vapor Stop is also used for the chip coat in epoxy floor systems that use vinyl chips. Using Vapor Stop reduces the risk of the epoxy floor system from blowing off from high moisture emission rates. Vapor Stop develops a tenacious bond to properly prepared surfaces and blocks the passage of moisture vapor. It is not uncommon for Vapor Stop to reduce 15lbs of MVE down to 2lbs. Vapor Stop is works so well that it will penetrate and cure within concrete even when applied under water. The system is applied easily by roller or squeegee without odors or flammability issues that could disrupt surrounding operations. Vapor Stop Pigmented Epoxy provides a low MVT Floor Coating suitable for use below a wood, VCT or other type of non breathing floor system.

 

Features & Advantages

  • MVE Tolerant
  • Ideal for Chipping with Vinyl Chips
  • Wicks Into Concrete
  • Use Over New or Old Concrete
  • Low Odor
  • Easy to Apply
4150 Vapor Stop
Physical Properties
Chemical Resistance
Tests Done at 70 Degrees
Acetone No Effect
Fahrenheit with 1/2 Pint Mass
Pot Life 60 minutes
Xylene No Effect
Gel Time (Hours) 2.75
10% HCL Spotting
Through Dry (Hours) 12
Ammonia No Effect
VOC 29
Degreaser Faint Spotting
Percent Solids 97/Wt. 94/Vol.
Liquid Plummer Faint Spotting
Flammable No
Vinegar Faint Spotting
Odor Low
Clorox Faint Spotting
Pencil Hardness H-2H
Windex No Effect
UV Resistance Good
Motor Oil No Effect
Non Yellowing Good
Gasoline No Effect
Abrasion Resistance OK
Hot Tire N/A

 

Install Guide

4150 Install Guide

 

Literature

Brochures |Tech Data | Training Sign Up Form
Chemical Resistance Chart

MSDS

4150 M.S.D.S Unit A | 4150 M.S.D.S. Unit B



You may also be interested in this/these product(s)

$1 671.34
$1 115.29

Recently Viewed Products

Cart

VirtueMart
Your Cart is currently empty.

Testimonials

Hi Mike, These are some pics of a floor I just finished using your 4001 Waterbased Epoxy Primer-5400 Waterbased Urethane Sealer. I was very pleased with the finished product. This floor was in horrible condition and the owner did not wish to spend money on grinding or resurfacing so I just went with it. The floor is over 100 years old and was very worn and porous. Once again I was impressed with the sealers and will continue to use them...


David Dickey
Concrete FX of Omaha

VBP Forum

Re:5400 v 5073
calconcrete 05.15.2012 17:57
5400 v 5073
GSNE 05.14.2012 21:59
Re: Thirsty stem walls
MNewman 05.14.2012 15:32
Thirsty stem walls
calconcrete 05.12.2012 17:21
Re:MVE ?
MNewman 05.07.2012 19:53