Roll On Rock 750 Sq Ft (3 Car Garage Flooring)

Now with a Lifetime Warranty!
:

:

:

:


$1 007.39

750 Sq Ft (3 Car Garage Flooring) Kit Includes:

  • 2 50lb boxes of flake
  • 4 kits of 4195 epoxy (2 gallons / kit)
  • 2 kits of 5073 clear polyurea topcoat(2 gallons / kit)*

Note:  if you selected a different topcoat, it will be substituted for the 5073

The Roll On Rock® System 2 (NOW ALSO AVAILABLE AS A 3-6 HOUR 1 DAY INSTALL) is a very easy to install Epoxy full broadcast flake coating system. System 2 is designed to be a 2 step application which uses 4195 as the primer and chip receiver coat. The 4195 incorporates our proprietary wicking technology which allows it to wick deep into concrete surfaces. This unique technology provides 3 times the adhesion of a standard epoxy installed over a profiled floor. That is why 4195 epoxy will withstand over 8 lbs of MVE where others fail at 3 lbs. A typical installation would be to apply the 4195 over porous concrete and broadcast the flake to rejection (about 50lbs of flake for a 2 car garage) within 45 minutes of applying the 4195. Then come back the next day to scrape the loose flakes off (if you save then you can use them on the next job) and then apply the clear topcoat. One coat is what most installers apply but about 30% of them install 2 coats to get a higher build. VBP offers 4 different Topcoats to choose from, 3 of them are below 10 VOC and 2 of them are Low Odor and Non-Flammable. All of these topcoats will not yellow, are hot tire resistant and extremely abrasion resistant. These ultra low VOC topcoats help provide a solution for areas that are environmentally conscious (reduce the effect on Global Warming) as well as areas that can not allow a solvent based system . All of these systems are also compliant with the new strict SCAQMD rules that become law July 2006. See the chart below for the pros and cons for each system. This range of floor coatings designed specifically for the garage floor is just one more reason why VBP is the leader in the garage floor and industrial coating industry.

HOT TIP.....
See the new 1 day install guide below and see how you can get better adhesion and only need 2 steps to do it in.

Use PolyUrea 5000 as the one coat Topcoat that gives the look and feel of 2 coats of CRU. 5000 is shinier and just as hot tire resistant as the CRU but will save you a trip to the jobsite, plus it is Non-Flammable and does not stink!

Or try the very popular Polyurea 5073, its claim to fame is the extra long potlife, great viscosity and the best part is you can walk on it in a little over 2 hours!

GARAGE FLOOR COATING EXTREME HOT WEATHER TIP....
Use the waterbased 5400 waterbased CRU topcoat, but be sure to keep material cool. You will not get solvent blisters associated with solventborne CRU's.

 

Install Guides

Roll On Rock System 2 | Roll On Rock System 2 (1 DAY VERSION)

 

5073 Installation Tips Guide


Literature
Brochure

MSDS (see individual components as needed per install guide)

M.S.D.S 5340 Unit A | M.S.D.S 5340 Unit B

 

Installation Videos

Online Training Videos Home Page

 

You may also be interested in this/these product(s)

$65.21







Back

Cart

VirtueMart
Your Cart is currently empty.

Testimonials

Mike,

I just wanted to let you know that in dealing with the many suppliers we deal with and many very large manufacturers, nobody even comes close to your level of service and expertise. I have talked to Mark Glenridge many times about specific jobs and just different ideas I come up with and his input is invaluable. The people that take the orders are always extremely helpful, shipping is the fastest I've seen, products fantastic and your prices are great. Keep up the great work. You will always have us as loyal customers. Thanks again for the great service

Brian Comstock
C&S Flooring Systems