2011 Versa-Crete 5gl Concentrated
View Full-Size Image


2011 Versa-Crete 5gl Concentrated

Price:
$174.07
$116.16

Ask a question about this product

Versa-Crete Polymer Concentrate is used to resurface over old worn concrete surfaces to provide a new stamped or Microtopping concrete finish. A concentrated product, Versa-Crete is mixed with water on a 1:1 or 2.5:1 ratio and then added to a sand and cement blend. You will find that the Versa-Crete Polymer is a very stable product which means you won't get the air bubbles in your Quarter inch overlays while the material is wet. We provide starting point blends for the different types of mortars needed. This allows the applicator to have greater control of the end product while reducing the shipping costs. Who wants to pay $10 to ship a 50 lb bag of sand and cement. That can add up very fast and before you know it your profits are reduced. Versa-Crete can be stamped 1/4-1/2-inch thick and it will accept most conventional stamping tools. Versa-Crete can also be sprayed on or troweled on to create any finish you desire. It is truly the only Concrete Polymer you will need. You will find Versa-Crete on driveways, patios, showrooms and restaurant floors. To see the colors go to our main website color chart page

Microtopping Versa-Crete is used to resurface floor surfaces to create a wide range of economical decorative finishes. From Cool to the touch Knock-Down to custom Skip Troweled Finishes, You Can Do It With Versa-Crete. A two component product, Versa-Crete consists of a Proprietary Liquid Polymer, specially formulated Cement blend and aggregate which are mixed by the applicator on the job-site.

 

Color Pack | Install Guide | Brochure | Spec Data

 

MSDS

All Mortars M.S.D.S | Concrete Overlay Accelerator M.S.D.S | Liquid Release M.S.D.S | Versacreate Latex M.S.D.S







Cart

VirtueMart
Your Cart is currently empty.

Testimonials

Hi Mike, These are some pics of a floor I just finished using your 4001 Waterbased Epoxy Primer-5400 Waterbased Urethane Sealer. I was very pleased with the finished product. This floor was in horrible condition and the owner did not wish to spend money on grinding or resurfacing so I just went with it. The floor is over 100 years old and was very worn and porous. Once again I was impressed with the sealers and will continue to use them...


David Dickey

Concrete FX of Omaha